Introduction

Jaw crusher is composed of bracket; jaw; eccentric shaft; jaw plate; spring, etc. The maximum compression strength of materials to be crushed is 320MPA. PE series jaw crusher is commonly used for primary crushing, and PEX series is used for secondary crushing and fine crushing.

Jaw crusher is composed of main frame, eccentric shaft, flying wheel, toggle plate, jaw plate, tension rod, fixed jaw, movable jaw and so on; among these parts the toggle plate can secure the whole body. The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.The moving jaw of the crusher makes periodic crushing and discharging along with the motor to realized batch production.

Advantages：Inquiry > >

Adopt the world-class manufacturing process, and select the top manufacturing material.
Movable jaw plate is made up of high quality steel cast and moved through two big flywheel, which is more advanced and very durable.
The crushing cavity is deep and do not have dead zone, which improves the feeding ability and capacity.
The lubrication system is safe and reliable. It is easy to change the parts and maintain.
The adjustment of discharging port is very big and meets various need of our customer. Gasket type of discharging port can strengthen the flexibility of jaw crusher and meets different manufacturing requirement.
Simple structure, reliable work, strong crushing capacity, and easy maintenance.
Jaw crusher adopts new tooth type of plate, which increases the length of jaw plate and improves the capacity.