Rotary Kiln-BAILING® Machinery

sales@bljq.com0086-371-66888887Whatsapp:+86-18203639337

Your Location: Home > Kiln Equipments

Rotary Kiln

Application：The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis.

Online Services Send Message

Introduction

This kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis.
The materials to be burnt get into the stove from the higher end of the cylinder. Due to the slope and slow rotation of the cylinder, the material moves around from top to bottom along the axis to finish its process. At last, the finished materials get into the cooler through the burner hood. The fuel gets into the kiln through the head of the kiln. The waste gas will be discharged from the end of the kiln after exchanging heat with the materials.

Hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or "firing pipe") which acts like a large bunsen burner. Fuel for this may be gas, oil, pulverized petroleum coke or pulverized coal.

Advantages：Inquiry > >

1.In rotary kiln dynamic balance, kiln skin general are uniform smooth rough, material tumbling move smoothly, gentle, material layer uniform and stable, and clinker quality are improved.
2. Eradicate rotary kiln thick skin and kiln circle, expanding the effective cross-sectional area of the rotary kiln, cement clinker production capacity increased by 10% generally, rotary kiln operation rate increased by more than 10%.
3. Rotary kiln is continuous working, without change the existing operating parameters, without consuming any material, the overall economic efficiency improved significantly.
4. Hot rotary kiln treatment with kiln ring, personnel and equipment are on outside, without rotary kiln temperature harm, good adaptability in high temperature large dust environment , and there is no danger for personnel and equipment even if the ring collapsed.
5. Effectively curb rotary kiln red kiln, rotary kiln knot big and small size egg ball accident, kiln liner and bearing, motor, rotary kiln body can be effectively protected, significantly prolong kiln using life.
6. large impact energy, high processing speed Kiln knot ring accident , can clear the kiln knot ring in a few minutes.
7. The machine has many functions, you can prevent the effective removal of knot ring, also can crush the big and small size egg ball.

Technical Parameters:Inquiry > >

Specifi cation	Technical parameters			Main reducer		Main motor			Support Number	Weight (t)	Remark
Specifi cation	Rotation speed (r/min)	Slope (%)	Capacity (t/h)	Model	Speed ratio	Model	Power (kw)	Rotation speed (r/min)
Φ1.9/1.6 ×36	0.53-1.59	4	2.5-3	JZQ750-1	48.58	JZT-72-4	30	1200/400	3	53
Φ2.1/1.8 ×36	0.5-1.51	4	4	UT2-110	163.36	JZS-81	30/10	1410/470	3	75
Φ1.2×25	0.5-1.6	3		PM650	40.17	JZTY71-4	22	1200/120	3	34
Φ1.6×32	0.158-0.258	3		PM750	48.57	JZJY61-4	15	1200/120	3	46.82
Φ1.8×45	0.66-1.98	4	3.5	UT2-110	163.36	JZS-81	30/10	1410/470	3	80
Φ2.2×50	0.125-1.25	3.5	4	ZS145-11	157	YCT280-4A	30	1320/132	3	130.71
Φ2.5×50	0.516-1.549	3.5	5.5	ZS165-7	99.96	YCT355-4A	55	1320/440	3	167.5
Φ3×48	0.3309-3.309	3.5	35	ZL130-14	32.11	ZSN4-250-21B	90	1000/100	3	237	Outside decomposition kiln
Φ3.2×50	0.398-3.975	3.5	50	ZL130-16	40.85	ZSN4-280-11B	190	1500/150	3	263	Outside decomposition kiln
Φ3.3×52	0.391-3.91	3.5	50	ZSY500-28	27.707	ZSN4-315-082	190	1000/100	3	280.8	Outside decomposition kiln
Φ4×60	0.396-3.96	3.5	104	ZSY630-35.5	34.601	ZSN4-355-092	315	1000/100	3	487.5	Outside decomposition kiln
Φ4.2×60	0.4165-4.165	3.5	116	ZSY710-35.5	35.526	ZSN4-355-12	420	1000/100	3	576.1	Outside decomposition kiln
Φ4.3×62	0.398-3.98	3.5	125	ZSY710-35.5	35.714	ZSN4-355-12	420	1000/100	3	598.5	Outside decomposition kiln
Φ4.8×74	0.35-4	4	208	JH710C-SW305-40	42.226	ZSN4-400-092					Outside decomposition kiln

Solutions and Cases:Inquiry > >

more >>

Sand production line
Stones are conveyed via the vibrating feeder to the jaw crusher for rough crushing process and then they are crushed further through the sand making equipment..
Powder production line
The powder production line is mainly used to process the non-flammable and non-explosive materials with the mohs grade lower than eight such as feldspar,

Send Message

Dear friend, thanks for your interest in Bailing brands product. Any equipment you need, pls feel free to contact our sales engineer. We will contact you within 24 hours. If you have urgent requirement, pls send inquiry to sales@bljq.com, or call +86 18203639337, or +86-371-66888887.