As the first equipment in Coarse Broken, jaw crusher, is often suffering equipment wearing, therefore we should always replace worn parts,which makes frequent disassembly,what is the correct methods to disassemble the jaw crusher? Now BAILING editor introduce it to you.
In the process of the jaw crusher disassembly you should firstly ensure the disassembly site be clean and free of other debris,which can guarantee various spare parts will not be too messy, and be found easily when installation.
Secondly, in addition to disassembly and replacement of parts, you should also take the cleaning work on the parts, it also can make the maintenance work of jaw crusher;
The correct method of operation to disassemble jaw crusher is for connecting rod is broken confidential overall remove the thrust plate, screw out the first baffle bolt, cut off the lubricating oil pipe, the thrust plate is hung on the crane hook or other lifting equipment, and then spring to release a horizontal connecting rod, the movable jaw to pull fixed jaw direction, remove the thrust plate. The thrust plate is unloaded, cut thin lubricating oil pipe and the cooling water pipe, the connecting rod with the following support to live, and then remove the connecting rod cap, can hang out the connecting rod.
Crusher spindle should be taken together with the belt pulley and the flywheel. The motor (together with the belt) along the track as far as possible to the crusher moved closer, remove the triangle belt. Then use the shaft lift crane. In order to remove the jaw, you must first cut off the dry oil lubricating oil pipe, remove the pull rod, remove the bearing cover, and then use a crane or other lifting equipment will be moving jaw out.