Your Location:  Home > Beneficiation Equipment
Magnetic Separator

Magnetic Separator

Magnetic separator is suitable for materials with magnetic difference, which is widely used for resource recovery, timber industry, mining industry, ceramics industry, chemical industry, food and other workshops. Magnetic separator is suitable for wet separating of materials with below 3mm particle size, such as magnetite, pyrrhotite, roasted ore, ilmenite and other materials. It is also used for iron removing operation of coal, non-metallic minerals, building materials and other materials, which is one of the most extensive and high versatility devices.

Introduction

Magnetic separator can be divided into wet magnetic separator and dry magnetic separator. Wet magnetic separator is the commonly used separator in ore dressing plants, which is applicable to separate strong magnetic minerals. Magnetic separator can separate magnetite, limonite, hematite, manganese siderite ore, ilmenite, wolframite, manganese ore, metallurgical manganese ore, manganese oxide, iron ore, kaolin, rare earth mining and so on. Magnetic separation process is realized by the magnetic and mechanical force on the particles in the magnetic field. Different magnetic mineral grains will move along a different trajectory, thus sorting into two or more separate ore dressing products.
Working principle:
The pump enters into the mining area of the cell though ore box with the force of water flow. Magnetic particles form into magnetic ball or linkage with the force of magnetic field. The magnetic ball and linkage are absorbed on the drum during they are moving towards magnetic pole with the magnetic force. When the magnetic ball and linkage are rotating with the moving drum, because of alternating polarity and magnetic stirring, the gangue and other non magnetic ore mixed in magnetic ball and linkage is fall down, while magnetic ball and linkage are absorbed on the surface of the drum. These are concentrates we need. The concentrates come to the field where the magnetic is the weakest with the rotating drum. Then they fall in to concentrate slot by the water flow. But the full magnetic roller uses brush roll to discharge ores. At last, the non-magnetic or weak magnetic minerals are discharged out of the cell with plump.

Advantages:Inquiry > >

  1. Good separation effect:This machine adopts dynamic magnetic system. The raw ores slide, move and roll at the surface of the drum, and there is no ores sticking to the drum, which helps separate different ores. The grade can be improved 1-4 times in the first separation process, and the grade can reach 60% in fine separation process.
  2. Large capacity:By using wrapped type open magnetic system, the materials do not stick together and the blocking phenomenon can be avoided, which leads to large capacity. The feeding capacity of an individual magnetic separator is at least 50 tons. And the machines can connected together to be put into use so as to improve the capacity.
  3. Wide application:This type magnetic separator can be divided into 4 categories, more than 20 types and models, which can meet the needs of iron ore, river sand, tailings, slags, steel ash, sulfate slag, grinding materials, refractory, plating, rubber, food industries and etc. Some of them are with multi-purposes.

Technical Parameters:Inquiry > >

Model CTB612 CTB618 CTB7512 CTB7518 CTB918 CTB924 CTB1018 CTB1024
Diameter(mm)   Φ600 Φ600 Φ750 Φ750 Φ900 Φ900 Φ1050 Φ1050
Length (mm)  1200 1800 1200 1800 1800 2400 1800 2400
Speed (r/min) 35 35 35 35 20 20 20 20
Gauss  1200-1500 1200-1500 1200-1500 1200-1500 1200-1500 1200-1500 1200-1500 1200-1500
 Feeding size (mm) 0.4-0 0.4-0 0.5-0 0.5-0 0.8-0 0.8-0 0.8-0 0.8-0
 Feeding density(%) 20-25 20-25 20-25 20-25 25-35 25-35 25-35 25-35
 Work clearance(mm) 30-40 30-40 30-40 30-40 45-75 45-75 45-75 45-75
Capacity dry ore (t/h) 10-15 15-20 15-20 30-35 35-50 40-60 50-100 70-130
 pulp (m3/h)         100-150 120-180 170-120 200-300
 Power (kw) 2.2 2.2 2.2 3 4 4 4 5.5
Weight (kg) 1200 1500 1830 2045 3500 4000 4095 5071
Overall dimension
 (mm)
2280×1300
×1250
2280×1300
×1250
2256×1965
×1500
2280×1965
×1500
3000×1500
×1500
3600×1500
×1500
3440×2220
×1830

3976×2250
×1830

Recommend Products: Inquiry > >

Solutions and Cases

Send Message

Thank you for your interest in Braun machine. Any of your comments or suggestions will be welcome to fill in the form of the following email via us.Please, or call + 86-371-66888887. Do not worry, we will not share your name, address or phone number with anyone. We love our company, and will do our best to help you. Thank you for taking the time to get in touch with us.   E-mail: wilson@bailingmachinery.com   Tel: 0086-371-66888887

  • Your Name *
  • Your Tel *
  • Your Email *
  • Message *
Facebook LinkedIn Twitter Pinterest Google+ Addthis