Your Location:  Home > Dryer Equipments
Sludge Dryer

Sludge Dryer

Weight:9-135t
Production Capacity:1.9-76t/h
Sludge dryer produced by Bailing Machinery is mainly used for dehydrating and drying sludge, thus reducing the water content and volume of sludge. It has many advantages such as strong adaptability, high heat utilization rate, uniform drying effect, fewer clean-up times, convenient maintenance, etc.

Principle

Sludge dryer is widely used in building material, metallurgy, chemical industry, cement industry, etc. It is used for drying sludge, sewage and slurry, including urban sludge, municipal sludge, sewage plant sludge, industrial sludge, metallurgy sludge, light industry sludge, coal sludge, mineral sludge, foundry sludge, textile sludge, electroplating sludge, activated sludge, sewage sludge, petrochemical sludge, paper-making sludge, printing and dyeing sludge, tanning sludge, slaughter sludge, pharmacy sludge, etc.

 
Sludge is fed into the dryer by a feeding device through an oblique chute; as the dryer rotates, the sludge is lifted up and scattered by lifting blades, and hot air preheats and drys the sludge to a certain extent; when the sludge falls down to the grate type blades, it is dried by the hot blades; at the same time, the hot air drys the sludge when it is lifted up and down by the blades; also, the cleaning-up device inside breaks up the lumps or pellets which are already formed in this process; finally, dried and loose sludge is discharged from the discharging end as final products;

Advantages:Inquiry > >

  1.Sludge dryer adopts automatic control device, we only need controlling panel to adjust time and finish the whole process, which improves the drying efficiency.
  2.The rotating barrel adopts stainless steel, and the barrel is beautiful and durable.
  3.Adopt triangular belt, the dryer operates stably, has low noise and is very safe.
  4.High-efficiency efficient air exit and inner-cage rotary movement makes sure can dry very fast and uniformly. It has big discharging port and is easy to discharge the material,
  5.High quality heat exchangers can control negative and positive motion, and improve drying quality.

Technical Parameters:Inquiry > >

 Model(m)
(Shell diameter*shell length)
Shell cubage
(m³)
Capacity
(t/h)
Gradient
(°)
Highest inlet air
temperature
(℃)
Main motor
power
(kw)
Weight
(t)
Φ1.2×8.0
9.0
1.9~2.4
3~5
700~800
7.5
9
Φ1.2×10
11.3
2.4~3.0
3~5
700~800
7.5
11
Φ1.5×12
21.2
4.5~5.7
3~5
700~800
15
18.5
Φ1.5×14
24.7
5.3~6.6
3~5
700~800
15
19.7
Φ1.5×15
26.5
5.7~7.1
3~5
700~800
15
20.5
Φ1.8×12
30.5
6.5~8.1
3~5
700~800
18.5
21.5
Φ1.8×14
35.6
7.6~9.5
3~5
700~800
18.5
23
Φ2.2×12
45.6
9.7~12.2
3~5
700~800
22
33.5
Φ2.2×14
53.2
11.4~14.2
3~5
700~800
22
36
Φ2.2×16
60.8
13.0~16.2
3~5
700~800
22
38
Φ2.4×14
63.3
13.5~16.9
3~5
700~800
37
45
Φ2.4×18
81.4
17.4~21.7
3~5
700~800
37
49
Φ2.4×20
90.4
19.3~24.1
3~5
700~800
45
54
Φ2.4×22
99.5
21.2~26.5
3~5
700~800
45
58
Φ2.6×24
127.4
27.4~34.0
3~5
700~800
55
73
Φ3.0×20
141.3
30.1~37.7
3~5
700~800
75
85
Φ3.0×25
176.6
37.7~47.1
3~5
700~800
75
95
Φ3.2×25
201
42.9~53.6
3~5
700~800
90
110
Φ3.6×28
285
60.8~76.0
3~5
700~800
160
135

Recommend Products:Inquiry > >

Solutions and Cases:

  • Sand production line
    Sand production line

    Stones are conveyed via the vibrating feeder to the jaw crusher for rough crushing process and then they are crushed further through the sand making equipment..

  • Powder production line
    Powder production line

    The powder production line is mainly used to process the non-flammable and non-explosive materials with the mohs grade lower than eight such as feldspar,

Send Message

Dear friend, thanks for your interest in Bailing brands product. Any equipment you need, pls feel free to contact our sales engineer. We will contact you within 24 hours. If you have urgent requirement, pls send inquiry to wilson@bailingmachinery.com, or call +86 135 26879181, or +86-371-66888887.

  • Your Name *
  • Your Tel *
  • Your Email *
  • Message *
Facebook LinkedIn Twitter Pinterest Google+ Addthis