Your Location: Home > Crusher Equipments
Cone Crusher

Cone Crusher

Production capacity:15-1000t/h
Feeding size:55-280mm
Power:50-300mm
Weight:11.2-81t
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness in mining industry, construction, road, etc.

Introduction

Product Introduction of Cone Crusher
1.Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness,such as concrete waste, gravel, granite,river stonebasalt, limestone, dolomite, quartz, iron ore, copper ore, gold ore,manganese ore,coal,etc.
2.Cone crusher(usually preferred to spring cone crusher) has an overloading protection system that allows metal not to pass through the crushing chamber so as not to damage the cone crusher.
3.The type of crushing chamber depends upon the feeding size and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type (PYZ) is applied to medium or fine crushing and the short head type  (PYD) is applied to fine crushing.

 

Working Process:
The working parts are two cutter heads, also called cones; one is fixed cone ( also called outer cone), the other one is movable cone ( also called inner cone), please refer to the picture. The outer cone is fixed, which is one part of frame; the movable cone is in the eccentric bush, so the central axis between the fixed cone and the movable cone intersects and forms into a bevel. When rotating, the movable cone rotates along the inner surface of the fixed cone. The place that the movable cone pressed against the fixed cone becomes the crushing cavity, where the materials is pressed, impacted and bent by the movable cone. The place that the movable moves away from the fixed cone becomes the discharging open, where the crushed materials are discharged out under the role of gravity.

Advantages:Inquiry > >

  1.The crushing ratio is very big and the efficiency is high.
  2.The wear-part is very little, and the operating cost is very low.
  3.Lamination crush and the finished product is very good.
  4.The hydraulic protection and clearing, automation degree is high, and the stopping time is low.
  5.The oil lubrication is durable and advanced and impact crusher has long lifetime.
  6.The crushing cavity is very flexible and the applicability is high.
  7.The maintenance is easy and the operation is convenient., which create great value for our customers.

Technical Parameters:Inquiry > >

Type Diameter of 
cylinder
(mm)
Feeding size
(mm)
Adjustment range of output size
(mm)
Capacity
(t/h)
Rotation speed
(r/min)
Power
(kw)
Overall size
(mm)
Weight
(t)
PYB900 900 115 15-50 50-90 333 55 2692*1640*2350 11.2
PYZ900 900 60 5-20 20-65 333 55 2692*1640*2350 11.2
PYD900 900 50 3-13 15-50 333 55 2692*1640*2350 11.3
PYB1200 1200 145 20-50 110-168 300 110 2790*1878*2844 24.7
PYZ1200 1200 100 8-25 42-135 300 110 2790*1878*2844 25
PYD1200 1200 50 3-15 18-105 300 110 2790*1878*2844 25.3
PYB1200 1750 215 25-50 280-480 245 160 3910*2894*3809 50.3
PYZ1200 1750 185 10-30 115-320 245 160 3910*2894*3809 50.3
PYD1200 1750 85 5-13 75-230 245 160 3910*2894*3809 50.2
PYB1200 2200 300 30-60 59-1000 220 260-280 4622*3302*4470 80
PYZ1200 2200 230 10-30 200-580 220 260-280 4622*3302*4470 80
PYD1200 2200 100 5-15 120-340 220 260-280 4622*3302*4470 81

Recommend Products: Inquiry > >

Solutions and Cases

  • Sand production line
    Sand production line

    Stones are conveyed via the vibrating feeder to the jaw crusher for rough crushing process and then they are crushed further through the sand making equipment..

  • Powder production line
    Powder production line

    The powder production line is mainly used to process the non-flammable and non-explosive materials with the mohs grade lower than eight such as feldspar,

Send Message

Thank you for your interest in Bailing machine. Any of your comments or suggestions will be welcome to fill in the form of the following email via us.Please, or call + 86-371-66888887. Do not worry, we will not share your name, address or phone number with anyone. We love our company, and will do our best to help you. Thank you for taking the time to get in touch with us.   E-mail: wilson@bailingmachinery.com   Tel: 0086-371-66888887

  • Your Name *
  • Your Tel *
  • Your Email *
  • Message *
Facebook LinkedIn Twitter Pinterest Google+ Addthis