Your Location: Home > Crusher Equipments
Vertical combination crusher

Vertical combination crusher

Production capacity:10-190t/h
Feeding size:<220mm
Vertical combination crusher, is a non-screen bar, adjustable crushing equipment, commonly used in crushing production line and sand production line. Main components of the rack gear, the movable cone, lubrication systems, hydraulic systems. Widely used in electric power, mining, ceramics, metallurgy, refractories, cement, coal and other industries.

Introduction

Vertical combination crusher can crush large materials, and the discharging granularity can be adjusted at will without the influence of the abrasion of the board hammer and lining plate. It adopts the no-grizzly-bar structure to avoid blocking, which is suitable to crush materials with much moisture and silt content.



 
Working principle:
Materials fall into the high speed spinning impeller from the top of the machine, and get crashed and crushed at high speed with the other materials spreading around the impeller in an umbrella shape under the high speed centrifugal action. After materials hit each other, they get further crashing, grinding and crushing in eddy current between the impeller and the chassis. Then they are discharged from the bottom barrel, forming multiple closed circuit recycling process. The finished product particle size is controlled by the screening machine.

Advantages:Inquiry > >

  1. The structure is very simple and reasonable, and the operating cost is low. The working principle is stone hit stone, and the abrasion is small.
  2. The crushing ratio is very high and energy saving.
  3. Vertical compound crusher has fine and coarse crushing.
  4. The moisture can be up to 8%, and the noise level is less than 75db.
  5. It is suited for middle hard material.
  6. The finished product is cubic, and the density is big, and the pollution is very small.
  7. The finished product is cubic, the density is big and the iron pollution is very small.
  8. The abrasion of impeller is very small, and easy to maintain

Technical Parameters:Inquiry > >

Model 
 
Feeding size
(mm)
Output size
(mm)
Capacity 
(t/h)
Rotation speed
(r/min)
Power
(kw)
Dimensions 
(L*W*H)
(mm)
PFL-800 <100 <3-5 60-90% 10-20 934 22 2100x1200x1700
PFL-1000 <120 <3-5 60-90% 20-40 769 37 2600x1400x1900
PFL-1250 <150 <3-5 60-90% 40-70 530 75 2800x1600x2100
PFL-1500 <180 <3-5 60-90% 70-100 495 132 3100x190x2200
PFL-1750 <200 <3-5 60-90% 130-190 424 160 3710x2360x2390
PFL-2000 <220 <3-5 60-90% 100-160 370 185 4100x2660x2620

Recommend Products: Inquiry > >

Solutions and Cases

  • Sand production line
    Sand production line

    Stones are conveyed via the vibrating feeder to the jaw crusher for rough crushing process and then they are crushed further through the sand making equipment..

  • Powder production line
    Powder production line

    The powder production line is mainly used to process the non-flammable and non-explosive materials with the mohs grade lower than eight such as feldspar,

Send Message

Thank you for your interest in Bailing machine. Any of your comments or suggestions will be welcome to fill in the form of the following email via us.Please, or call + 86-371-66888887. Do not worry, we will not share your name, address or phone number with anyone. We love our company, and will do our best to help you. Thank you for taking the time to get in touch with us.   E-mail: wilson@bailingmachinery.com   Tel: 0086-371-66888887

  • Your Name *
  • Your Tel *
  • Your Email *
  • Message *
Facebook LinkedIn Twitter Pinterest Google+ Addthis