Your Location:  Home > Kiln Equipments
Titanium rotary kiln

Titanium rotary kiln

Application:Building material, chemical, environment protect industry,etc.

Introduction

Bailing titanium rotary kiln structure is similar to aluminum, cement industries production rotary kiln, its barrel are made of rolled steel plate , inside inlay with refractory lining, forming a predetermined angle to the horizontal. There are three sets of the rectangular wheels support on each catch wheel support device of barrel. In the vicinity of the intermediate wheel of cylinder tangential with a big ring gear fixed on spring plate, there is a small gear meshing with below 300.

Advantages:Inquiry > >

1. When titanium dioxide kiln operation normally, the main drive motor transmit power to open type gear device through reducer andthen drive kiln.
2. The main working principle is: input titanium dioxide filter cake hydrolyzate to slowly rotate rotary kiln end (barrel high side)with a certain inclination , meanwhile mixing chamber at kiln head(cylinder low side) blow the clean fire and hot air into kiln inside to achieve dehydration and calcination.
3. The titanium dioxide filter cake after over 1000℃ high temperature dehydration and calcination, they will roll over along the circumferential and move along the axial direction(form the high side to low sidewith the help of sloping rotary kiln body, constantly to complete dehydration and calcination process .
4. Ultimately through kiln hood lower part dual hydraulic discharge valve flap enter into cooling system, and after cooling and screening the finished product is titanium dioxide.

Technical Parameters:Inquiry > >


No.

Specification
         (m)

Basic parameters

Main motor

Catch wheel type

Support bearing

Weight (t)

Rotation speed (r/min)

Slope (%)

Capacity (t/d)

Power
(kw)

Rotation speed (r/min)

1

Φ2.5×60

0.3~1.0

4

240

55

1470

mechanical

rolling

217

2

Φ3/3.6×
60

0.7~1.35

3.5

360

80

1470

mechanical

sliding

310


Solutions and Cases:Inquiry > >

  • Sand production line
    Sand production line

    Stones are conveyed via the vibrating feeder to the jaw crusher for rough crushing process and then they are crushed further through the sand making equipment..

  • Powder production line
    Powder production line

    The powder production line is mainly used to process the non-flammable and non-explosive materials with the mohs grade lower than eight such as feldspar,

Send Message

Thank you for your interest in Bailing machine. Any of your comments or suggestions will be welcome to fill in the form of the following email via us.Please, or call + 86-371-66888887. Do not worry, we will not share your name, address or phone number with anyone. We love our company, and will do our best to help you. Thank you for taking the time to get in touch with us.

  • Your Name *
  • Your Tel *
  • Your Email *
  • Message *
Facebook LinkedIn Twitter Pinterest Google+ Addthis